Why Most Aquariums Fail (And How To Easily Prevent It)

Most aquariums don’t fail because people don’t care. In fact, the opposite is usually true.

Most beginners genuinely want their aquarium to succeed, but they run into problems because of a few simple mistakes they didn’t even realize they were making.

In this article, I’ll be covering the most common mistakes I see that can cause aquariums to struggle or fail.

More importantly, you’ll learn how to avoid these mistakes so your tank can remain stable, healthy, and successful long term.

Lack Of Patience

One Of My Aquarium Racks
One Of My Aquarium Racks

The number one mistake I see time and time again is a lack of patience.

Many important processes in this hobby — especially in new aquariums — simply take time to work properly.

This includes the cycling process (where beneficial microorganisms establish), plants growing and adapting to the tank, fish breeding, and baby fish and shrimp growing to maturity.

None of these processes can be rushed, and trying to speed them up often creates more problems than it solves.

A healthy aquarium is not something that becomes fully stable overnight. It develops gradually as beneficial bacteria, plants, and microorganisms establish themselves and begin working together.

Constant Adjustments Can Make Things Worse

In my opinion, many aquarium problems actually come from people interfering with the tank too often.

It’s very common for beginners to constantly adjust things, move decorations, clean excessively, or try to fix minor issues immediately.

While this usually comes from a good place, it can actually slow down the natural stabilisation process. Aquariums function as ecosystems, and like any ecosystem, they need time to settle and balance naturally.

In many cases, doing less and allowing the tank to stabilise on its own leads to better long-term results.

Bottled Bacteria Products Aren’t Always Necessary

There are products on the market, such as bottled beneficial bacteria, that claim to speed up the cycling process.

While these products can help in some situations, they don’t always make a noticeable difference.

Their effectiveness can vary depending on the specific tank setup and how they are used1. I’ve covered this topic in more detail in this article, where I explain when these products may be useful and when they may not be worth using.

In many cases, simply allowing the tank to cycle naturally is the safest and most reliable approach.

Listening To Bad Advice

My 40 Gallon Community Tank
My 40 Gallon Community Tank

One of the biggest challenges beginners face is figuring out which advice to trust.

There is a huge amount of aquarium content online, but not all of it comes from people with real hands-on experience.

Following incorrect advice can lead to poor decisions, unhealthy fish, and unstable aquariums. Fortunately, there are a few simple ways to evaluate whether the advice you’re getting is reliable.

Look For Proof Of Real Experience

The first thing to check is whether the creator actually shows themselves doing what they’re talking about, or if they are only speaking about it without demonstrating real examples.

For example, if someone is providing a guide on keeping angelfish, do they show their own angelfish in their aquarium?

Demonstrating real setups and livestock shows that the advice is based on firsthand experience, not just theory.

Seeing someone successfully maintain the species or method they are discussing is one of the strongest indicators that their advice is trustworthy.

Be Cautious When Advice Contradicts Most Other Sources

If most experienced aquarists agree on something, but one creator says something completely different, it’s important to question it and look for clarification.

For example, I’ve seen videos from large and well-established aquarium channels claiming that Betta splendens should live for around five years if proper care advice is followed.

However, when I asked them directly for clarification, they confirmed that their actual experience was very different from what was stated in their video.

This highlights the importance of verifying information, even from large and well-established channels.

Read The Comments — They Can Reveal Important Corrections

The comments section can also be a valuable source of additional information.

For example, I’ve seen videos where creators presented themselves as understanding how the Walstad Method works, despite admitting elsewhere that they had never actually tried it themselves.

As a result, a lot of the information in those videos is inaccurate.

However, many experienced hobbyists pointed out the mistakes in the comments, helping to correct the misinformation.

Reading comments can often reveal whether others have had success following the advice, or whether there are concerns from more experienced aquarists.

Always Prioritise Advice From Proven Experience

In general, the safest approach is to prioritise advice from people who clearly demonstrate real, long-term success with their aquariums.

This greatly reduces the chances of following incorrect information and helps you build a more stable and successful aquarium.

Not Cycling The Aquarium Properly

My Celestial Pearl Danio Aquarium
My Celestial Pearl Danio Aquarium

One of the most common and serious mistakes beginners make is not cycling the aquarium properly — or skipping the cycling process entirely — before adding fish.

Cycling is the process where beneficial microorganisms grow inside your aquarium and biological filter.

These bacteria break down toxic waste produced by fish, specifically ammonia and nitrite, and convert it into nitrate, which is far less harmful.

Without these beneficial bacteria, toxic compounds can quickly build up in the water and harm or kill your fish.

Why Fish-In Cycling Is Risky For Beginners

The fish-in cycling method, where fish are added before the tank is fully cycled, can work. However, it is highly controversial and more difficult to do safely, especially for beginners.

This method requires frequent water changes to keep ammonia and nitrite at safe levels. Many beginners are not aware of how important and frequent this maintenance needs to be.

I regularly receive comments from people struggling with problems caused by fish-in cycling. In most cases, the issue comes down to underestimating how much effort is required to keep the fish safe during this process.

Because of this, I personally don’t recommend fish-in cycling for beginners.

Adding Plants Can Help Protect Fish

If you’ve already added fish to an uncycled tank, or you’re set on doing a fish-in cycle, adding fast-growing plants can help significantly.

Fast-growing plants absorb waste compounds directly from the water, helping to improve water quality and increasing the survival chances of your fish during the cycling process23.

The Dark Start Method Is The Safest Approach

My personal recommendation for beginners is the dark start method.

This involves setting up the aquarium with substrate (such as aquasoil) and hardscape (such as rocks or wood), but without adding plants or livestock right away.

The tank is then left to cycle fully before anything living is added.

I know this approach can feel unintuitive, since the tank looks empty during this stage. However, there’s a reason so many experienced hobbyists recommend it.

By the time you add your fish, shrimp, snails, and plants, the aquarium is already cycled.

This greatly reduces the risk of ammonia spikes and other common problems that often occur in new tanks.

Cycling in Walstad Method Aquariums

If you’re setting up a Walstad Method aquarium, the process is slightly different.

In my own Walstad tanks, I add plants immediately so they can begin establishing themselves as early as possible. The ammonia released naturally from the soil is usually enough to start the cycling process.

Some people add fish to Walstad tanks right away, but I personally prefer to wait until ammonia and nitrite levels are under control first.

This gives the plants time to adjust and become more effective at stabilising the tank naturally.

My article on setting up your first Walstad Method aquarium can help you avoid common mistakes and increase your chances of success.

Cycling Always Requires Time, Effort, Or Both

The most important thing to understand is that cycling an aquarium safely always requires either time, effort, or both.

Trying to rush the cycling process is one of the most common causes of aquarium failure.

Allowing beneficial bacteria and plants to establish properly creates a stable foundation that will support a healthy aquarium long term.

Not Doing Water Changes And Not Using A Filter

My Nano Community Tank
My Nano Community Tank

Another common mistake beginners make is not using a filter or not performing water changes, especially when first starting.

Filters and water changes both help maintain water quality. Filters provide a place for beneficial bacteria to live, which break down harmful waste. Water changes physically remove waste compounds, excess nutrients, and other pollutants from the aquarium.

Together, they make it much easier to keep the aquarium stable and safe for your fish.

My Personal Approach: Both Filtered And Filterless Tanks

Around half of my tanks run without filters and receive very few water changes, while the other half use filters and receive monthly water changes.

The reason I use both methods is that filterless, low water change systems need to be designed that way from the very beginning.

They rely heavily on natural processes to maintain stability.

This means factors like plant selection, plant density, fish species, and stocking levels all need to be carefully planned to ensure the system works safely and reliably.

Filterless Tanks Can Work — But They Require Proper Planning

I don’t believe filterless tanks are inherently difficult, and beginners can succeed with them if they follow the right approach.

However, one of the biggest problems is misinformation. Some creators share advice on filterless systems without having real, long-term success maintaining them. This can create confusion and lead beginners to attempt setups that aren’t properly designed for stability.

This is why it’s so important to follow advice from people who clearly demonstrate real experience with the methods they recommend.

Filters And Water Changes Are The Safest Option For Beginners

If you’re new to the hobby and want the most reliable and beginner-friendly approach, using a filter and performing regular water changes is the safest option.

This provides a much larger margin for error and makes it easier to maintain stable water quality while you gain experience and learn how aquariums function.

Overcleaning The Aquarium

My Planted Cherry Shrimp Tank
My Planted Cherry Shrimp Tank

Overcleaning is a mistake many beginners make without realising it can cause serious problems.

Aquariums are not just containers of water — they are living ecosystems filled with beneficial bacteria and microorganisms that help keep the system stable.

When you clean too aggressively or too often, you can disrupt these beneficial microbial colonies and reduce your aquarium’s ability to process waste naturally.

It’s also important to understand that aquariums vary greatly depending on their setup. Overcleaning may cause more problems in some tanks than others, especially in planted or naturally balanced systems.

Never Rinse Filter Media In Tap Water

One of the most common examples of overcleaning is rinsing biological filter media in tap water.

Biological filter media is where beneficial microorganisms live. These bacteria are essential because they break down toxic ammonia and nitrite, helping keep your fish safe.

Tap water contains chlorine or chloramines, which is added to make it safe for human consumption. However, they are harmful to beneficial microorganisms.

It’s important to note that your location plays a major role in this, as some areas use chlorine in tap water while others use chloramines, with chloramines being more problematic for beneficial microorganisms.

Here in the UK, chlorine remains the most commonly used disinfectant in tap water, but chloramine use is increasing45 as the water infrastructure continues to age, but it’s difficult to find exact levels for most locations around the world.

The Los Angeles water report confirms chloramine levels of 1.6–3.0 mg/L6, and the Centers for Disease Control allow levels of up to 4 mg/L in drinking water7.

Based on available research, this level falls within the range where chlorine can damage or kill beneficial microorganisms, with levels listed in the table below.

MicroorganismChloramine
Ammonia Oxidising Bactera1.6mg/l8
Ammonia Oxidising Archaea1.6mg/l9
Nitrite Oxidising Bacteria1mg/l10
Comammox1mg/l11

It’s also worth pointing out that your water temperature also plays a role in how much of an effect chlorine and chloramines have on microorganisms12.

Even brief exposure carries some risk, and personally, I don’t see any reason to take that risk.

Instead, I rinse my filter media in a bucket of old tank water during a water change.

This water is already dechlorinated and safe, so it allows you to clean the filter without harming the beneficial bacteria.

Since I clean my filters during water changes anyway, I always have a bucket of tank water available for this purpose.

Gravel Vacuuming Can Also Disrupt Beneficial Microorganisms

Another area where overcleaning can cause problems is gravel vacuuming, especially in lightly planted aquariums or tanks with soft water.

Recent research suggests that heterotrophic bacteria — microorganisms that break down organic waste like fish waste and decaying plant matter — may also play a role in processing ammonium into nitrite13, nitrate14, and even nitrogen gas15.

These microorganisms live in the organic material that naturally accumulates in the substrate.

If you constantly remove this organic layer before these microbial colonies fully establish, you may reduce the aquarium’s ability to process waste naturally. This can potentially lead to ammonia spikes because ammonium is no longer being processed as efficiently.

My Personal Approach: Letting Waste Feed Plants Naturally

Personally, I use what I call the fish poop fertilisation method.

This approach allows fish waste and organic matter to break down naturally in the aquarium, where it can be used as a nutrient source for plant growth.

Because of this, I don’t gravel vacuum my tanks.

This helps preserve beneficial microbial colonies and allows the aquarium to remain more stable over the long term.

By avoiding unnecessary overcleaning, you allow your aquarium’s natural biological processes to function properly, which helps maintain a healthier and more balanced ecosystem.

Not Adding Plants

My Jungle Betta Fish Tank
My Jungle Betta Fish Tank

Not adding plants is another common mistake, although it’s better described as missing an important safety net rather than doing something strictly wrong.

It is possible to run a successful aquarium without plants. However, adding live plants makes maintaining a stable and healthy aquarium much easier, especially for beginners.

Plants provide additional biological support that helps keep the system balanced.

Plants Help Improve Water Quality Naturally

Aquarium plants help absorb a wide range of waste compounds directly from the water.

By absorbing these waste compounds, plants help improve water quality and reduce the risk of harmful spikes. This provides an extra layer of protection alongside your biological filter.

In many ways, plants act as a natural filtration system, working continuously to stabilise the aquarium, and some of my aquariums run on a plant-based cycle with microorganisms playing a secondary role.

I’ve also created a free Low-Tech Plant Index tool that highlights fast-growing aquarium plants, which are especially useful for improving water quality and helping new tanks stabilise more quickly.

Plants Help Fish And Shrimp Feel Safe

Beyond their filtration benefits, plants also improve the overall environment for your livestock.

They provide natural hiding places for fish and shrimp, which helps them feel more secure. This reduces stress and encourages more natural behaviour16.

Lower stress levels can improve overall health, increase survival rates, and help your fish and shrimp thrive long term.

Adding plants makes aquariums more stable, more natural, and significantly easier to maintain successfully.

Not Having A Test Kit

One Of My Planted Tanks
One Of My Planted Tanks

Not having a test kit is another common mistake, especially when first setting up a new aquarium.

Test kits allow you to monitor your water parameters and track how the cycling process is progressing. This helps you confirm when your tank is safe for fish and alerts you to potential problems before they become serious.

While some experienced hobbyists run tanks without regularly testing their water, I personally always keep test kits on hand. They provide peace of mind and allow you to verify exactly what’s happening inside your aquarium.

This is particularly important during the early stages, when the tank is still stabilising.

Test Strips Are Good Enough For Most Beginners

You don’t need to use liquid test kits, even though that’s what I personally use.

In my experience, aquarium-specific test strips — such as those made by API — are accurate enough for most hobbyists. They are quick, easy to use, and provide reliable readings for the parameters that matter most.

The most important thing is to make sure you are using test strips designed for aquariums, not swimming pools.

Pool test strips are designed for completely different water conditions and have been very inaccurate in my experience. They are not suitable for aquarium use and should be avoided.

You Only Need To Test The Most Important Parameters

You don’t need to test every possible water parameter, especially as a beginner.

I tend to monitor more parameters because I run experimental setups, including filterless tanks with very low water changes. However, for most people, a basic set of tests is more than enough.

At a minimum, you should have a way to test for:

  • Ammonia — highly toxic to fish, even at low levels17
  • Nitrite — also highly toxic and a key indicator during cycling18

These two parameters are the most important when establishing a new aquarium.

Additional Tests For Shrimp Keepers: GH And KH

If you plan to keep shrimp, it’s also worth testing GH (General Hardness) and KH (Carbonate Hardness), at least when setting up the tank.

General hardness measures the mineral content of your water, which is essential for proper molting and long-term shrimp health.

Without the correct mineral levels, shrimp may struggle to molt successfully, which can lead to health problems or death.

Having a basic test kit helps you make informed decisions and greatly increases your chances of maintaining a healthy and stable aquarium.

Not Researching Your Livestock Properly

My White Cloud Tank
My White Cloud Tank

Not properly researching the fish or shrimp you plan to keep can lead to a wide range of problems.

Every species has its own specific care requirements, and understanding these in advance is essential for long-term success.

This includes researching important factors such as:

  • Maximum adult size
  • Temperament (whether the species is peaceful or aggressive)
  • Diet and feeding requirements
  • Preferred water parameters (such as temperature and hardness)
  • Minimum tank size

These factors determine whether a species will simply survive or truly thrive in your aquarium.

Aggression And Compatibility Are Critical

Aggression is one of the most important factors to consider when choosing livestock.

Aggressive behaviour can include chasing, fin nipping, stressing other fish, or even attempting to eat smaller tank mates. Even species that seem peaceful in stores can behave differently in certain environments.

Choosing compatible tank mates helps create a peaceful and stable aquarium, which reduces stress and improves overall fish health.

Fish that feel safe and unstressed are far more likely to live long, healthy lives.

Water Parameter Compatibility Is Often Overlooked

Water parameters, especially temperature, are another critical consideration.

Different species are adapted to different environments, and not all fish can safely live in the same temperature range.

For example, White Cloud Mountain Minnows prefer cooler water19, while Betta splendens require much warmer temperatures20. There is very little temperature overlap between these species, which makes them unsuitable to keep together.

Keeping species outside of their preferred temperature range can weaken their immune system and reduce their lifespan.

Test Your Tap Water Before Choosing Livestock

It’s also a good idea to test your tap water before deciding which species to keep.

Knowing your natural water parameters — such as hardness and pH — makes it much easier to choose fish and shrimp that are naturally suited to your conditions.

This is far more reliable than constantly trying to adjust your water chemistry to suit species that may not be compatible with your local water.

Choosing livestock that matches your natural water conditions makes the aquarium easier to maintain and greatly increases your chances of success.

Poor Lighting Choices

My Planted Guppy Tank
My Planted Guppy Tank

Poor lighting choices are another common mistake, especially in planted aquariums.

Many beginners assume that using a low-intensity light is the main problem. However, based on my experience as a low-tech planted tank creator, high-intensity lighting actually causes far more issues.

I’ve had many people reach out to me with severe algae problems that felt completely uncontrollable. In some cases, the algae had taken over to the point where they were considering completely redoing their aquariums.

Fortunately, in many of these situations, the problem was fixable simply by adjusting the lighting and improving the overall balance of the system.

High-Powered Lights Are Often Unnecessary For Beginners

One of the main causes of this issue is that beginners don’t always realise there are different types of planted tank setups.

High-end, high-powered lighting systems are designed for high-tech aquariums that use injected CO₂ and carefully controlled nutrient dosing. These systems allow plants to grow faster, but they also require more precise balancing.

Many beginners buy these powerful lights, even though they are running low-tech aquariums without CO₂. This creates an imbalance that often leads to algae problems.

I’ve covered the best lighting options for low-tech planted tanks in a separate article, but it’s important to understand that affordable, entry-level lights are usually more than sufficient.

In fact, I still use budget-friendly lighting on most of my own tanks without any issues.

Excess Light Can Cause Algae Growth

Without a CO₂ system, excess light can quickly create algae problems.

In most beginner tanks, there are already excess nutrients present in the water. When lighting intensity is too high, algae are able to use that excess energy and nutrients more efficiently than plants.

This often leads to algae outbreaks instead of healthy plant growth.

For beginners, using a moderate, low-tech friendly light is usually the safest and most effective approach.

How to Fix Algae Caused by Excess Lighting

If you’re already dealing with algae caused by excessive lighting, the solution is often straightforward.

Reducing the intensity of your light — sometimes down to around 20% of its maximum power — can make a significant difference. Performing regular partial water changes can also help reduce excess nutrients, which further limits algae growth.

Depending on how severe the algae problem is, it may take several weeks or even months to fully resolve, especially in cases involving hair algae.

How Long Should Aquarium Lights Be On Each Day?

Another common question is photoperiod, which refers to how long the aquarium lights are on each day.

Currently, most of my tanks run at full intensity for around six hours per day. This is a very good starting point for most beginners and helps provide enough light for plant growth while reducing the risk of algae problems.

Keeping the photoperiod controlled and avoiding excessive lighting helps maintain a balanced and healthy planted aquarium.

Overstocking The Aquarium

My Medaka Tank
My Medaka Tank

Overstocking is another extremely common mistake, especially for beginners.

This can mean either adding too many fish to a tank that is an appropriate size, or keeping fish in a tank that is too small for their adult size.

Every fish produces waste, which produces ammonia. The more fish you have, the more waste is produced. If your tank cannot safely process that waste, toxic compounds can build up and harm your fish.

Overstocking makes it much harder to maintain stable water quality and significantly increases the risk of problems.

Higher Stocking Levels Require Additional Support

There are ways to safely support higher stocking levels, but they require careful planning and additional maintenance.

Some of the methods that can help include:

  • Choosing species that occupy different areas of the tank (top, middle, and bottom)
  • Using a larger or more powerful filter
  • Performing regular water changes
  • Maintaining dense plant growth

These measures help increase the system’s ability to handle a higher bioload, which refers to the total amount of waste produced by the livestock.

However, these approaches reduce your margin for error, which makes them less suitable for beginners.

Beginners Should Leave A Safety Buffer

If you’re new to the hobby, it’s much safer to stay well below your tank’s maximum stocking capacity.

This gives you a buffer, which makes it easier to maintain stable water quality and reduces the risk of ammonia spikes or other problems.

A lightly stocked aquarium is also easier to maintain and more forgiving if something goes wrong.

Using a Stocking Calculator Can Help

To estimate safe stocking levels, I personally use the free AqAdvisor stocking calculator.

It’s very simple to use. You enter your tank dimensions, select the fish species you want to keep, and choose how many of each species you plan to add. The tool then calculates a stocking percentage to help guide your decisions.

If you’re a beginner, I recommend keeping your stocking level below around 75%.

This provides a safety margin and makes it much easier to maintain a healthy, stable aquarium long term.

Final Thoughts: Success Comes From Avoiding Simple Mistakes

My Endler's Livebearer Tank
My Endler’s Livebearer Tank

Most aquarium failures don’t happen because of a lack of effort. They happen because of a few common mistakes that are easy to make when you’re still learning how aquariums work.

The good news is that once you understand these mistakes, they’re very easy to avoid.

The most important things to focus on are being patient, allowing your tank to cycle properly, avoiding overstocking, and maintaining stable water quality. Using plants, appropriate lighting, and reliable equipment like filters and test kits can make the process much easier and significantly improve your chances of success.

It’s also important to research your livestock carefully and make decisions based on proven, reliable information from people who demonstrate real experience.

Aquariums are living ecosystems, and stability develops over time. The more you allow natural biological processes to establish and avoid unnecessary interference, the more stable and self-sustaining your aquarium will become.

If you focus on stability, patience, and proper planning from the beginning, you’ll avoid most of the common problems beginners face and create an aquarium that remains healthy, balanced, and enjoyable for years to come.

Sources

  1. Using FritzZyme Live Nitrifying Bacteria to Cycle a Freshwater Tank – https://fritzaquatics.com/resources/articles/fritzzyme-user-guide-fw ↩︎
  2. Nitrogen removal performance and mechanisms of three aquatic plants for farmland tail water purification – https://www.sciencedirect.com/science/article/abs/pii/S0048969724006612 ↩︎
  3. Potential of Duckweed (Lemna minor) for the Phytoremediation of Landfill Leachate – https://onlinelibrary.wiley.com/doi/10.1155/2018/3951540 ↩︎
  4. White Rose Research Online – https://eprints.whiterose.ac.uk/id/eprint/233759/1/jws2025053.pdf ↩︎
  5. Guidance on the use of ultraviolet (UV) irradiation for the disinfection of public water supplies – https://www.dwi.gov.uk/private-water-supplies/pws-installations/uv-systems/ ↩︎
  6. 2024 WATER QUALITY REPORT – https://www.calwater.com/docs/ccr/2024/ela-cc-2024.pdf ↩︎
  7. About Water Disinfection with Chlorine and Chloramine – https://www.cdc.gov/drinking-water/about/about-water-disinfection-with-chlorine-and-chloramine.html ↩︎
  8. Abundance and activity of ammonia oxidizing archaea and bacteria in bulk water and biofilm in water supply systems practicing chlorination and chloramination: Full and laboratory scale investigations – https://www.sciencedirect.com/science/article/abs/pii/S0048969720305532 ↩︎
  9. Abundance and activity of ammonia oxidizing archaea and bacteria in bulk water and biofilm in water supply systems practicing chlorination and chloramination: Full and laboratory scale investigations – https://www.sciencedirect.com/science/article/abs/pii/S0048969720305532 ↩︎
  10. Adding monochloramine to control the growth of nitrite oxidizers and complete ammonia oxidizers in nitrifying moving-bed biofilm reactor – https://www.sciencedirect.com/science/article/abs/pii/S2589014X22002924 ↩︎
  11. Adding monochloramine to control the growth of nitrite oxidizers and complete ammonia oxidizers in nitrifying moving-bed biofilm reactor – https://www.sciencedirect.com/science/article/abs/pii/S2589014X22002924 ↩︎
  12. Abundance and activity of ammonia oxidizing archaea and bacteria in bulk water and biofilm in water supply systems practicing chlorination and chloramination: Full and laboratory scale investigations – https://www.sciencedirect.com/science/article/abs/pii/S0048969720305532 ↩︎
  13. Heterotrophic nitrification – An eternal mystery in the nitrogen cycle – https://www.sciencedirect.com/science/article/pii/S0038071722000682 ↩︎
  14. Heterotrophic nitrification – An eternal mystery in the nitrogen cycle – https://www.sciencedirect.com/science/article/pii/S0038071722000682 ↩︎
  15. A heterotrophic nitrification-aerobic denitrification bacterium Acinetobacter sp. WZ-1: the superior stress resistance and the unconventional nitrogen metabolic pathways – https://www.sciencedirect.com/science/article/pii/S2589914725001215 ↩︎
  16. Environmental enrichment techniques and tryptophan supplementation used to improve the quality of life and animal welfare of Nile tilapia – https://www.sciencedirect.com/science/article/pii/S2352513419302972 ↩︎
  17. Aquarium Water Quality: Nitrogen Cycle – https://www.fdacs.gov/Consumer-Resources/Recreation-and-Leisure/Aquarium-Fish/Aquarium-Water-Quality-Nitrogen-Cycle ↩︎
  18. Aquarium Water Quality: Nitrogen Cycle – https://www.fdacs.gov/Consumer-Resources/Recreation-and-Leisure/Aquarium-Fish/Aquarium-Water-Quality-Nitrogen-Cycle ↩︎
  19. White Cloud Mountain Minnow – https://www.fishkeeper.co.uk/fish/freshwater/cyprinids/white-cloud-mountain-minnow- ↩︎
  20. Betta splendens – https://www.fishkeeper.co.uk/fish/freshwater/anabantids/siamese-fighter ↩︎