How to Build a Planted Endler Guppy Tank Without CO₂!
I set up this 25-litre planted aquarium to test the FZone SOLO light and try several plants I hadn’t grown before, all without injected CO₂.
Here’s how I built it, what I’ve changed along the way, and how the tank is doing 96 days after setup.
Affiliate disclosure: I earn a commission when you buy through affiliate links on this page, at no extra cost to you.
Equipment Used

Here’s the equipment I used for this build.
- 25 Liter (6.6 US Gallon) Aquarium
- FZone SOLO Light
- Fluval Stratum Aquasoil
- Nicew Slim Hang-On-Back Filter
- Seaoura SR318 Heater
- Window Privacy Film
- Seiryu Stone
- Spider Wood
There are plenty of alternatives depending on your goals and budget, and I’ll cover relevant options as we work through the setup.
Adding The Background
A background is completely optional, but I like adding one to keep the focus on the aquarium rather than whatever happens to be behind it.
I use affordable window privacy film, which costs much less than the versions marketed for aquascaping.
For what I want from a background, it looks very similar and works just as well.
The film I use is easy to apply to the outside of the rear glass:
- Wipe the glass clean, removing any grease, dust, or other residue.
- Spray the glass with water.
- Lay the film against the wet glass.
- Gently smooth it out with your hand or a credit card, working from the centre towards the edges to push out trapped air and excess water.
There are various colours available, so you can choose one that suits the look you want.
My main aim is simply to hide distractions behind the tank and let the plants, hardscape, and livestock stand out.

Hardscape Setup

I’m keeping the hardscape simple for this tank, using two rocks and an old piece of Spider Wood.
Both rocks were sold to me as Seiryu Stone, although I suspect one might actually be Ying Stone.
There are plenty of other hardscape options you could use.
I find Seiryu Stone and Spider Wood easy to source, straightforward to work with, and affordable for a small build like this.
Joining The Hardscape

For this setup, I’m trying Moss Hardscape Compound with Moss Hardscape Glue.
The compound looks like coloured lint, which you place between the contact points of the wood and rocks before applying the glue.
It’s worked surprisingly well during assembly, although I’ve needed a slightly different approach from the tissue paper I previously used.
The biggest lesson so far is that less is more.
When I used too much compound at once, the outside hardened before the glue soaked through the whole piece, leaving a weak joint.
Adding small pieces allowed the glue to penetrate the material, so I could gradually build up the connection.

My approach was to place a small piece at the contact point, apply enough glue to soak through it, and let it set before adding more.
Repeating that process made it easier to join the hardscape without leaving soft material inside the bond.
The joints set quickly enough for me to place the hardscape in the tank within five minutes.
It wasn’t submerged until roughly 15 minutes later, after I’d added the substrate, fitted the filter, and filled the tank.
That was my timing for this build, rather than a verified curing recommendation. Follow the instructions supplied with your glue before submerging the finished hardscape.
Substrate

I’m using Fluval Stratum Aquasoil, which is one of my favourite substrates for planted tanks.
I’ve covered my experience with it in more detail in my Fluval Stratum review.
That said, there are plenty of other substrate options that can work well in planted aquariums, so you don’t need to use Stratum to create something similar.
I added a full 4 kg (8.8 lb) bag to this 25 litre (6.6 US gallon) tank, giving me a planting depth of roughly 5 cm (2 inches).
That provided enough depth to plant into comfortably while keeping the setup straightforward.
The medium 4 kg bag was plenty for this build, so I didn’t need the larger bag.
If you’re planning something similar, check your tank’s base dimensions and intended substrate depth before buying, as capacity alone won’t tell you how much you need.
Filtration

There’s no need to overcomplicate filtration for this setup, so I’m using an affordable Nicrew nano hang-on-back filter.
I’ve used plenty of these nano hang-on-back filters over the years without any issues.
There are other aquarium filters that could work for a tank this size, but this model includes a pre-filter sponge, saving me from buying one separately.
The sponge covers the intake and helps reduce the risk of small livestock being sucked into the filter and injured by the impeller.
That’s useful here because I’m planning to keep Endler guppies and Neocaridina shrimp, both of which may produce babies.

Replacing The Cartridge With Foam
Although it’s optional, I recommend replacing the supplied cartridge with reusable aquarium filter foam when setting up this filter.
Nicrew recommends changing its cartridge every four weeks, which creates an ongoing cost.
I buy a sheet of 30 PPI foam and cut it to fit, using the original cartridge as a template.
The foam provides both mechanical filtration, trapping debris, and biological filtration, giving beneficial bacteria somewhere to grow.
These bacteria help process the ammonia and nitrite produced as waste breaks down.

The comparison image shows the difference in the amount of material: the black media came with the filter, while the blue media is my replacement foam.
There are plenty of other filter media options, but foam keeps this setup simple and affordable.
My article on the best aquarium filter media explains my reasoning in more detail.
Cleaning The Foam
I don’t replace my 30 PPI foam every month.
When it needs cleaning, I squeeze it out in a bucket of old tank water during a water change, then put it back in the filter.
This keeps running costs down and allows me to reuse the established media.
You can add a thin layer of filter floss after the foam in the water’s flow path if you want extra fine-particle filtration.
However, I’ve recently stopped using it because I’ve noticed very little difference in the visible particles suspended in my water with or without it.
Heating

I initially used one of my old AquaEl heaters as a temporary option while setting up the tank.
I’ve since switched to the Seaoura SR318 Heater.
Its compact size makes it easy to fit into this nano setup without taking up too much space.
It’s also affordable, and I’ve found that it holds the set temperature reliably.
I’ve set this tank to 24°C (75°F) as a suitable temperature for the livestock and plants I’m keeping.
If you choose different species for your own setup, check their temperature requirements before deciding on a setting.
Cycling

I cycled this tank before adding livestock so it could process the ammonia produced by their waste.
Cycling establishes beneficial microorganisms that convert ammonia into nitrite, then nitrate, helping prevent toxic ammonia and nitrite from building up.
If you’re new to aquarium keeping, my aquarium nitrogen cycle guide explains the process in more detail.
My Dark Start Method

I prefer a fishless cycle, specifically the dark start method.
For this build, I used brand-new filter media and left the aquarium light off to help limit algae growth during cycling.
I use an aquarium cycling ammonia solution to supply ammonia without exposing fish or shrimp to it.
This provides a food source for the microorganisms as their population develops.
This tank took just over four weeks to cycle.
Temperature, pH, and nutrient availability, including phosphate, can also affect the timeframe.
There’s no fixed completion date: some tanks cycle relatively quickly, while others take longer than six weeks, so I rely on test results rather than the calendar.
Tracking Progress And Confirming The Cycle

I use a liquid water test kit to track ammonia, nitrite, and nitrate.
Seeing ammonia fall and nitrite appear can be reassuring when the process feels slow, but ammonia disappearing alone doesn’t mean the cycle is complete.
My endpoint is the tank processing a 2 ppm ammonia dose, with both ammonia and nitrite reading 0 ppm within 24 hours.
Here, ppm means parts per million, and the dose refers to the ammonia concentration in the aquarium water—not the concentration of the bottled solution.
Follow the ammonia product’s dosing instructions, and don’t keep adding full doses while ammonia or nitrite is accumulating.
Although I prefer liquid tests, the more affordable test strips I’ve compared have given similar results for nitrite and nitrate.
However, the multi-test strips in my comparison don’t include ammonia, so you’ll still need a separate ammonia test.
I explain those differences in my liquid test kits versus test strips comparison, including why I prefer a liquid test for ammonia.
Lighting
Lighting is one of the main things I’m testing with this setup.
I’m using the FZone SOLO nano tank light, which several of my friends in Asia and North America have spoken highly of but has only just been released here in Europe.
Its output gives me scope to try plants that may struggle under the more affordable lights I usually use.
I’ll cover those choices and how they perform in the planting section.
One of my favourite features is being able to adjust the white, red, green, and blue channels independently.
This lets me change how the tank looks, particularly bringing out the reds in some varieties of Neocaridina shrimp.
Measuring The Light Output

The accompanying photograph at the start of this section shows both my PAR reading and the spectral power distribution, or SPD, so you can see the results directly.
Using my PARwise meter, I recorded 145 µmol/m²/s, commonly described as a PAR reading of 145, with the light at maximum intensity and the sensor at the bottom of a water-filled tank.
This measures the amount of light reaching the sensor within the wavelengths conventionally used to assess photosynthetic lighting.
The meter also records the spectrum, showing how the output is distributed across different wavelengths.
My Lighting Settings

I initially ran the light at 70% intensity for six hours per day, followed by four hours with blue at 50% and the other channels switched off.
I’ve since reduced the settings because this is a powerful light for the setup.
My current schedule is:
| Period | Duration | Channel settings |
|---|---|---|
| Main lighting | 6 hours | White, red, green, and blue: 30% each |
| Evening lighting | 4 hours | Blue: 15%; all others: 0% |
That means the aquarium receives ten hours of lighting in total, although the final four hours use only the reduced blue channel.
I plan to try increasing the intensity as the tank settles, using plant growth and any algae development to guide adjustments.
These are my current settings for this build, rather than a target every tank needs to match.
The SOLO is more expensive and far more powerful than the lights I usually use.
If you’re working with a smaller budget, my best aquarium lights article includes more affordable alternatives.
Plant Selection
There’s a wide range of low-tech-friendly plants you could use in a tank like this, so you don’t need to copy my selection.
I’m combining familiar plants with several new ones that I want to test under the FZone SOLO.
There’s no injected CO₂ in this setup; I’m relying on natural sources of CO₂.
Alongside the Stratum, I’m adding 1 ml of TNC Complete per 10 litres of replacement water during water changes, with no root tabs.
For this build, I’ve chosen:
- Limnophila sessiliflora
- Red Root Floaters
- Anubias Petite
- Anubias ‘Coffeefolia’
- Bucephalandra ‘Brownie Ghost’
- Cryptocoryne × willisii
- Microsorum pteropus ‘Narrow’
- Hygrophila polysperma ‘White’
- Lysimachia parvifolia ‘Red’
- Hygrophila pinnatifida
- Rotala ‘H’ra’
- Lilaeopsis brasiliensis
Some have specific jobs in the tank, while others are experiments that will help me build up more first-hand experience.
Limnophila For Nutrient Uptake

Limnophila sessiliflora is one of the most important plants in this setup.
I’m including it to take up nutrients as it grows and contribute to natural plant filtration.
I aim to support healthy plant growth and help limit algae, although adding Limnophila doesn’t guarantee an algae-free tank.
I’ll still need to keep the lighting appropriate for how the plants are growing.
Testing Colour And Growth

The Red Root Floaters have a different purpose: I want to see whether I can achieve deep burgundy leaves, rather than just a slight reddish tint.
I’m curious how close I can get in this tank without injected CO₂. It’s a goal for the experiment, rather than a result I can promise.
Hygrophila polysperma ‘White’, Lysimachia parvifolia ‘Red’, and Hygrophila pinnatifida are all new to me.
I want to find out how they grow under this light and whether they’re plants I’d choose again for a similar setup.
Trying A New Carpet
Lilaeopsis brasiliensis is my new carpeting plant for this build.
I want to gain practical experience with more low-tech carpeting plants so I can offer readers advice based on growing them myself.
Tropica notes that stronger lighting encourages its compact, lawn-like growth and recommends an open position without shading from other plants.
That makes the balance between my floating plants and the light reaching the foreground something to watch as the tank develops.
For this trial, I want to see whether it spreads into a useful carpet without injected CO₂, how long that takes, and how much maintenance it needs.
Planting
I waited until the tank had finished cycling before adding the plants, as elevated ammonia levels during cycling can cause problems for some sensitive species.
I find planting one of the easiest parts of the setup, especially with some affordable aquascaping tweezers.
I break the process into five stages: epiphytes, background, midground, foreground, and floating plants.
1. Attaching The Epiphytes
I start with the epiphyte plants, which I attach to the hardscape using aquarium-safe glue.
For this build, those are Anubias Petite, Anubias ‘Coffeefolia’, Bucephalandra ‘Brownie Ghost’, and Microsorum pteropus ‘Narrow’.
Keep their rhizomes—the thick stems from which the leaves and roots grow—above the substrate. Mounting them on the wood or rocks makes this straightforward.
I also attach Hygrophila pinnatifida to the hardscape.
Although it can grow in the substrate, its shoots can attach to wood and rocks, making it useful for this part of the layout.

2. Planting The Background
Next, I plant Limnophila sessiliflora and Rotala ‘H’ra’ behind the hardscape.
I hold one to three stems at a time with the tweezers and push their lower ends into the aquasoil.
As I withdraw the tweezers, I briefly open and close the tips, allowing the loose substrate to fall back around the stems and hold them in place.
The aim is to release the plants without pulling them straight back out. I leave some space between each small group rather than packing all the stems into one hole.
3. Planting The Midground
In the midground, I add Cryptocoryne × willisii, Hygrophila polysperma ‘White’, and Lysimachia parvifolia ‘Red’.
I use the same basic tweezer technique, holding rooted plants by their roots rather than gripping their leaves. For the Cryptocoryne, I bury the roots while keeping the crown, where the leaves emerge, at the substrate surface.
Other forms of Hygrophila polysperma can grow tall surprisingly quickly, so ‘White’ is an interesting midground experiment for this tank.
Tropica describes ‘White’ as slower-growing and suitable for either the midground or background, with regular trimming helping it stay compact. As this is my first time growing it, I’ll judge its position by how it develops here rather than assume it will stay short without maintenance.
4. Planting The Foreground
For the foreground, I plant Lilaeopsis brasiliensis, aiming for roughly one plantlet every 2.5 cm (1 inch).
It spreads through stolons, commonly called runners, which produce new plants and gradually fill the gaps.
Spacing the plantlets out gives them room to spread, with the aim of eventually forming a carpet.
5. Adding The Floating Plants

Before adding the floating plants, I fit a 3D-printed filter blocker to keep them away from the hang-on-back filter’s outflow.
This helps prevent the falling water from repeatedly pushing them underwater.
I then place the Red Root Floaters on the surface.
Their colour isn’t a matter of turning the light up.
The 2Hr Aquarist’s growing observations show redder leaves under limited nitrogen availability, including examples where plants remained green under stronger light when nitrogen was plentiful.
That makes nutrient availability another factor to watch as this tank develops, alongside lighting.
There’s no fixed timetable for achieving burgundy leaves, and I don’t want to deprive the rest of the planted tank of nutrients just to force the floaters to change colour.

Stocking

I waited a couple of days after planting, then carried out a large water change before adding livestock.
This was a precaution because residues on some nursery-grown plants may pose a risk to sensitive shrimp and snails.
Pesticide residues are one documented concern, although a short wait and a water change don’t guarantee that treated plants are safe.
I checked ammonia, nitrite, and nitrate with my water test kit before stocking, then repeated those checks daily for the following three days.
I didn’t find any concerning readings during those checks.
Preparing My Soft Water

The Seiryu Stone has increased the tank’s pH, general hardness (GH), and carbonate hardness (KH) a little.
Because my tap water is naturally soft, I’m also using shrimp remineralising salt.
My current dose is one level scoop, using the scoop supplied with the product, per 10 litres of replacement water during water changes.
That describes what I’m adding to this setup, rather than a dose to copy regardless of your water supply.
You may not need this step, depending on your tap water parameters.
I’m only adding the remineraliser because my tap water is naturally soft, acidic, and low in alkalinity.
You can use a GH/KH test kit to check your water’s general and carbonate hardness, alongside a separate pH test, then decide whether any adjustments are needed for your livestock.
Adding The Shrimp
I started with 10 Bloody Mary Neocaridina shrimp and three Amano shrimp, transferred from my other tanks.
I’ve found Neocaridina shrimp and Amano shrimp a useful combination for eating algae.
In my tanks, the Neocaridina spend plenty of time picking at softer growth, while the Amanos also tackle some of the tougher algae the smaller shrimp tend to leave.
Adding The Japan Blue Endlers
About a week later, I finally had time to visit my local aquatic shop and bought two male and three female Japan Blue Endler Guppies.
Japan Blue Endlers are commonly sold hybrids between guppies and Endler’s livebearers.
The ones I’ve kept have been hardier than regular guppies in my experience, and their blue colouring was another reason I chose them.
I normally keep only male livebearers, but I chose a mixed-sex group here because a friend is happy to take the offspring for his breeding project.

Within a month, there were babies in the tank.
Don’t underestimate how quickly livebearer numbers can increase, especially in a small aquarium.
To help keep numbers manageable, I have a good friend and a local aquatic shop that are happy to take all the fry the tank produces.
Algae Issues
At 96 days old, this tank still has some algae issues, although things are starting to settle down.
A few weeks ago, I manually cleaned the algae that had formed on the glass during the early stages of the setup.
So far, it hasn’t returned particularly quickly, which is encouraging.
Slowing The Hair Algae

Hair algae has been more persistent.
I’ve encountered similar outbreaks during the first few months of other setups, particularly when using powerful lighting, so my current approach is to adjust the conditions and give the tank time rather than add an algae treatment.
About a month ago, I reduced the lighting intensity to 30%.
Since then, the hair algae’s growth seems to have slowed, and the green hair algae already seems to be breaking down.
That’s an encouraging response, although the tank has also been developing during that month, so I can’t attribute the improvement entirely to the lighting change.
Watching Nutrient Readings
I’ve noticed elevated phosphate readings alongside hair algae outbreaks in several of my tanks.
In this setup, the highest result fell within the 1.0–2.0 ppm bracket on my phosphate test kit, so I can’t give a more precise peak value.
The readings now appear to be trending down.
In previous tanks, I’ve often seen hair algae levels naturally decline as phosphate fell below roughly 0.5 ppm, sometimes towards 0.25 ppm or an undetectable reading.
Nitrate is currently undetectable on my test kit.
I suspect plant uptake contributes to that, but the initial nutrient release from the Fluval Stratum could be fading too.
Lower nitrogen availability may also help the Red Root Floaters develop the deeper red colour I’m aiming for, but time will tell.
For now, I’m giving the reduced lighting more time.
In my other tanks, I’ve found that shrimp often clear weakening hair algae more readily, so I’m hoping to see the same here.
Once the outbreak is under control, I plan to increase the light gradually and watch how the tank responds.
The Tank Today

At the time of writing, the tank is 96 days old.
There are still some algae issues to work through, but several of the plants I’m testing have exceeded my expectations, and I’m looking forward to seeing it after another three months.

The Lilaeopsis brasiliensis has started sending out runners and slowly filling the gaps in the foreground.
Once the algae is under control, I’m interested to see whether gradually increasing the lighting helps it spread faster.

The Hygrophila polysperma ‘White’ is doing better than I expected.
There’s some algae on its leaves, but I’m pleased with how it’s growing with the light reduced to 30%.

The Lysimachia parvifolia ‘Red’ has also started developing more colour.
This has coincided with nitrate becoming undetectable on my test kit, although I can’t yet tell whether that change is responsible.

The Hygrophila pinnatifida has been another pleasant surprise.
I’d seen plenty of people describe it as difficult, but so far, I’ve found it straightforward to keep in this setup.
While the original plant growth has started to melt, new aquatic-form leaves have been produced by the plant, and it seems really healthy.
I’m not sure whether my water parameters, lighting, or a combination of conditions explains that result.
It’s still early, but its performance has encouraged me to keep experimenting with it.

The Red Root Floaters look healthy, although their leaves are still green.
With nitrate now reading undetectable, I’m curious whether new growth will develop more red colouring, but that remains something to watch rather than an outcome I’ve achieved.
Final Thoughts
This tank is still a work in progress, but I’m pleased with how several of the new plants are doing without injected CO₂.
The slow spread of the Lilaeopsis and the early growth of the Hygrophila varieties have given me plenty to follow over the coming months.
The biggest lesson so far has been that having a powerful light doesn’t mean I need to use all of its output.
Reducing the intensity and giving the setup time has coincided with the hair algae slowing down, so I’m in no rush to turn it back up.
If you’re taking inspiration from this build, you don’t need to copy every piece of equipment or try all the same plants.
Choose plants that suit your goals, allow enough room for your livestock, and make adjustments based on what you actually see happening in the tank.
For me, the next few months will show whether these promising early results develop into a planted aquarium that’s easy to maintain over the longer term.