How To Easily Build Your Own Aquarium Racking System!
If you’re keeping multiple aquariums, a strong rack system can save you a lot of space while keeping everything organized and safe.
Recently, I built a new aquarium rack for my fish room, and in this guide, I’ll walk you through the process step by step.
I’ll cover how I chose the rack, where I set it up, how I built and painted it, and a few lessons I learned along the way.
My goal is to show you how to build a reliable and affordable aquarium rack that can hold multiple tanks without worrying about stability.
Choosing The Right Rack

For this build, I went with an RB Boss industrial shelving unit (available from Screwfix here in the UK).
Honestly though, almost any heavy-duty industrial shelving will work just as well.
I’ve tried some of the cheaper racks you can find on Amazon, and while they’re fine for very small tanks, they don’t feel nearly as sturdy.
For just a little extra money, these industrial shelves are much stronger, larger, and give me far more confidence when stacking multiple aquariums.

Checking Load Capacity

The most important thing to look for when choosing a rack is the load capacity—how much weight each shelf can safely hold.
The unit I bought is rated for 450 kg (just under 1,000 lbs) per shelf, which is plenty for aquariums.
A useful rule of thumb is to take your aquarium’s volume in litres and double it to get an approximate weight in kilograms (including water, glass, and substrate).
For example, a 100-litre tank can weigh up to around 200 kg once filled with water, hardscape, substrate, and aquarium accessories.
Using that rule, these shelves could theoretically hold aquariums up to about 225 litres each—but I don’t go anywhere near that size.
My Setup
Instead, I prefer to spread out smaller tanks.
On mine, I keep:
- Two 45-litre (12 US Gallon) tanks on two shelves
- Two 30-litre tanks (8 US Gallon) and one 25-litre tank (6.6 US Gallon) on another shelf
This way, I’m well below the weight limit, and I have peace of mind knowing the rack is stable and safe.
Rack Location

I set this rack up in the corner of my fish room.
To make space, I had to remove an old wardrobe that the previous tenant left behind.
It had rotted against the wall, but once that was out of the way, the area was perfect for the new rack.
Leave Room Behind The Rack
When choosing a location for your aquarium rack, make sure you have enough room for the rack itself—and if possible, leave some space behind it as well.
Being able to get behind the rack makes tasks like plugging in heaters, filters, and lights far easier.
On some of my older racks that sit flush against the wall, even the simplest jobs became frustrating because I couldn’t reach the cables or plugs properly.
Optional But Helpful
If you’re tight on space, it’s not essential to leave that gap behind the rack.
But if you can, it’s worth doing—you’ll thank yourself later when it’s time to maintain your tanks or add new equipment.
Building The Rack
I wasn’t exactly looking forward to putting the rack together, but it turned out to be much easier than I expected.
The instructions were clear and simple, so the whole process went smoothly.
Deciding On Shelf Spacing
The rack came with enough shelves to add an extra level, but I chose not to.
Instead, I left extra space above my aquariums.
That extra clearance makes water changes a lot easier.
I use a simple bucket-and-siphon system, and while it doesn’t need tons of space, squeezing another shelf in would have made the setup feel far too cramped.
Painting The Rack
Since I had to paint the rack inside my fish room, the first step was making sure the area was well ventilated.
I opened all the windows and doors, then set up the tower fans I normally use to keep my tanks cool in summer, pointing them toward the doorway.
This helped keep the air moving and made the process much safer.
Painting The Rack
Painting is completely optional, but I decided to give it a try.
I’ll admit I’m not the best painter, but it turned out to be pretty straightforward.
I used a quick-drying paint, which made the job easier and, to my surprise, didn’t have a strong smell—so it likely gave off minimal fumes.
A Mistake I Made
At the time, I tried to save effort by only painting the parts of the rack that would be visible from the front.
Looking back, that wasn’t the best choice.
If I were to do it again, I’d paint the entire rack right from the start to avoid having to go back and cover missed areas later.
Sealing The Shelves
One of the biggest mistakes I made with some of the cheaper racks I bought from Amazon was not sealing the MDF shelves that came with them.
MDF (medium-density fiberboard) is a type of engineered wood that soaks up water very easily.
Since aquarium setups always involve the risk of splashes or spills, unsealed MDF can swell, warp, or even break down over time.
The best long-term solution would be to replace the MDF with plywood and seal it properly, but that adds extra cost and time.
For this build, I decided to try using an MDF sealer instead.
Using MDF Sealer
I’d seen mixed reviews about MDF sealer—some people said it worked great, others thought it made no difference, and a few even called it a waste of time.
Personally, I’ve been happy with it.
I used a more affordable sealer and applied a single coat to each shelf.
It really does dry fast, though the matte finish made it a little tricky to see where I had already painted.
Still, I did my best and felt confident that I got good coverage.
Results And Lessons Learned
Looking back, I would probably apply at least two coats per shelf for extra protection.
Even so, with just one coat, I’ve already had a few spills, and cleanup has been quick and easy without any damage to the MDF.
Things I Would Do Differently

The first thing I’d change is how I painted the rack.
At the time, I tried to save effort by only painting the parts that would be visible from the front.
That backfired.
I ended up having to go back several times to cover the undersides of the back supports and other areas I’d missed.
Each time, I had to move tanks, cover them up, and grab the paint again.
If I were starting over, I’d paint the entire rack right away—or even better, paint all the metal supports before assembling it.
Upgrade The Shelves
As I mentioned earlier, plywood shelves would probably be the best long-term option.
They’re stronger and more water-resistant than MDF, especially when sealed.
That said, I’ve been really happy with how the MDF sealer has performed so far.
I only applied one coat, but it’s already held up well against spills.
Ideally, I would have added a second coat for extra peace of mind, but even with one coat, I haven’t had any problems yet.
Final Thoughts
Building an aquarium rack might seem intimidating at first, but with the right shelving unit and a bit of preparation, it’s actually a very straightforward project.
Choosing a strong industrial rack, sealing the shelves, and giving yourself enough space for maintenance will go a long way in making your setup both safe and convenient.
While there are always things I would do differently in hindsight—like painting the entire rack from the start or waiting for the exact size I wanted—I’m really happy with how this build turned out.
It’s sturdy, affordable, and makes keeping multiple aquariums much easier.
If you’re thinking about setting up your own aquarium rack, my advice is to take your time, plan ahead, and don’t cut corners on stability.
A well-built rack will last for years and give you peace of mind knowing your aquariums are safe and secure.